Tag: Hooks

How Ping K15 Driver Can Help You Beat Your Competition

How Ping K15 Driver Can Help You Beat Your Competition

Article by Leiting

Have you ever wondered what in the world can make a golf fly so far to the left or to the right? How do you hit those unintentional duck hooks or wicked slices? Why can you never turn or move the ball when you really want to or have to, say to hook it around a tree. Some of these problems have to do with the players swing, and some has to do with the golf and the training aids the player is using.

The golf of today has so much technology packed into such a little piece of equipment it’s incredible and picking the right one is almost as important as having the proper irons fitted to your game. Some fitting experts believe that almost 50 % o players are playing with the wrong type of equipments of golf. One of the main characteristics in the golf equipments is the amount of spin the ball is designed to attain. There are some simple guidelines to follow so you get the proper spin golf ball. Here are the three main types of spin golf balls.

Low Spin Golf BallsThe lower spinning golf balls will help to eliminate the side spin on your shots, which in turn eliminates the chances of that big slice or hook. The ball will end up flying straighter through the air at the target. The one thing to mention about these types of balls is that they may not travel as far through in the air but they make up for it when they hit the ground. Due to the minimal amount of spin produced the balls will roll further when they hit the ground and not spin back. It’s because of these two characteristics that these types of balls are geared toward higher handicappers. They help them hit their shots straighter and they also run out on the fairways.

Mid Spin Golf BallsThe mid spin golf balls are basically here to fill the gap between the low and high spinning balls. They are designed to incorporate both feel and distance together. Thus they attract a huge rage of golfers and with mid handicap games. These golf balls produce a nice feel and control to them as well as allowing some good distance when needed. This will vary depending on the manufacturer as they are offered by most.

High Spin Golf BallsThe high spinning balls are designed mainly to do what the name says; produce a lot of ball spin while they are in the air. A high spinning golf ball will produce a longer carry due to the backspin that happens at impact. They will not get any run on the fairways but they have a huge advantage around the greens. It is this added spin around the greens that allows the player a little more control should they know how to use it. It will help the ball stop quicker on the greens sometimes even with backspin. These balls are mainly used by the lower handicapped players who can take advantage of the characteristics.

Now that you know the different spinning golf ball types, it is important to use Ping K15 Driver to your advantage. The Ping K15 Driver has an elongated head design that combines with an external weight pad to position the center of gravity for higher launching and longer carry drives. It is engineered with Straight Flight Technology (SFT) which promotes natural club head rotation by concentrating approximately 10% of the head mass towards the heel. A larger face increases forgiveness and ball velocity for greater distance and accuracy.You can easily get it on http://www.golf-clubs-sale.com/, all the details of the Ping K15 Driver is on http://www.golf-clubs-sale.com/Ping-K15-Driver–sale-g1138.htmlHaving the ball that is best suited to your skill level and game should give you a leg up on your playing partners or competition. Try out different balls and take notice of the amount they spin. This simple observation can make a huge difference in your game.

About the Author

http://www.buycheapgolf.com/

Three Pieces Of Equipment Every New Golfer Should Have

Three Pieces Of Equipment Every New Golfer Should Have

Article by Tom Jones









You don’t need as much equipment as you’d think when you first start golfing. Until you’ve learned more of the basics of the game, you won’t need all the bells and whistles that are available. You won’t really benefit from the more advanced equipment until then. Keep the following important tools in mind as you assemble your beginner golf kit.

The first item you should spend money on is a decent driver. The first thing you need to be aware of is that there are some “specialty” drivers which aren’t quite certified by the PGA. In accordance with where you are and what your ambitions as a golfer this might not be a glitch for you. When you talk about drivers, everyone has their unique needs. On the whole, drivers with flexible shafts allow more distance, however less domination. If you have issues with hooks, slices, or rogue balls you may choose to forfeit distance for additional control by utilizing a steel shafted driver.

You should also take a bit of time to delve into the most comfortable shaft length for you to utilize prior to spending money also. This will take some testing to ascertain what the best length is, yet it will be time well spent in terms of lower amounts of back pain after 18-holes.

Ball markers are also important.They are especially important if you’re playing in a group. These markers are used to mark where your ball stopped on the green and won’t interfere with the play of the others in your group. Etiquette demands that the person farthest from the hole plays first. So without a ball marker to mark your ball’s spot, it could interfere with the play of the other balls on the green. These inexpensive markers are necessary for a good game when playing with a group.

Protective eyewear is the final investment beginners need to make. Many beginning golfers overlook the importance of this piece of equipment. The fact remains that you play golf in elements and in the daytime. Not protecting your eyes from the sun can result in serious damage. Not only will it be easier to see where you want your ball to go if you don’t have to constantly shield your eyes, but you can keep better track of where actually goes,

Beginner golf equipment doesn’t have to be expensive but if you buy the right equipment, it can add years of enjoyment to your game. Whether you’re just learning golf or returning to it, it can be easy to get distracted by the fancy bells and whistles that are now available. You’ll be in great shape, however, if you stick with the beginner golf equipment mentioned above.



About the Author

Tom’s websites: Barbie Igrice, Car Transporting Companies, EvaAirlines and Fema Trailers for Sale.










Improve Your Swing With The Medicus Driver

Improve Your Swing With The Medicus Driver

Article by Jeremy Winters









Statements by Medicus Golf that their unique dual hinge, which happens to be present on the Medicus Driver, will give instant feedback from a bad swing are legitimate. This is the very best swing trainer in the entire world, and here is why. When the player learns to swing this particular driver without breaking it down at the hinges, he knows his swing is on plane and also in cadence. Now the player is well on his way to getting rid of hooks and slices, as well as producing longer, much more accurate shots over and over.

The head of this particular club is heavy, and as a consequence of this your swing likewise can feel heavy. Expecting it to break pretty much guarantees that it will, but then several methodical swings reinforces self confidence and the anticipated mishaps begin to vanish. Following this routine, pick up a standard driver. It feels light, very easy and mysteriously the previous swing errors are usually fewer.

The Medicus Driver is fashioned to break any time swing flaws are discovered; these can arise in six unique parts of the golf swing. To begin with, it could possibly break on the backswing about a foot higher than the ball. The golf club needs to be taken back with arms and shoulders though with absolutely no wrist twist. Once the player learns to take their club back gradually and with a lower plane, his golf game should begin to greatly improve.

The second break will possibly occur while in your backswing when the club head is waist high. If the toe of your golf club is not aiming up, your club will unhinge. Also, when the swing is way too flat or when it really is too much over the top, your club will additionally break down.

Break 3 will occur near the top of the backswing. Break 3 may also be close to the top of that swing. This occurs whenever the golf club face is not square.

Break 4 happens at the start of the down swing. This takes place simply because the player stops his wrist way too quickly causing the club to unhinge. This can additionally take place when the arms aren’t close enough to the body.

The fifth break position is at contact. The reason is that the golfer sways moving his weight backwards. When he is too far behind the ball during impact, the golf club will break.

And finally, the Medicus Driver will become out of balance on the follow through when it doesn’t stay on plane. A flat follow through could be responsible for this.

So, here is an effective training aid that instantly recognizes the flaws in a golfer’s swing. Not only will it break down in a flaw, it helps in fixing the error if it does not unhinge. By simply repeating your swing without having the break, your muscle memory is established and then the ideal swing can be repeated repeatedly.



About the Author

Are you looking for equipment that will help you improve your golf? Be sure to visit my site to learn more about the Medicus Driver and Medicus Dual Hinge.










Knitting Machines: An Alternative to Hand Knitting

Knitting Machines: An Alternative to Hand Knitting

Knitting machine is yet another invention in the world which is obsessed with making the life simpler and easier. It is an automatic machine used for knitting yarns. Since hand knitting is quite time consuming and asks for a greater man power, the people dealing in knitting business turn towards knitting machines which render more output with lesser man power.

With the growth of industrialization, knitting machine business is also flourishing at a rapid speed. It renders greater profits margins to the knitting businessmen using these machines, as it cuts the labor cost to a great extent. All one need to do is set or program the knitting machine to knit a particular pattern and wait for the machine to pour out a perfectly knitted fabric piece. It is way simpler than thought though the only thing which one has to be careful about is, to pay constant attention at the knitting machine so as to avoid any kind of tangled or slipped stitches.

]]>

The yarn thickness plays an important part in making a choice for a knitting machine. The rule in practical sense indicates that if the yarn is thicker than the working capacity of knitting machine, then it would invariably lead to the splitting of knit hooks in between the yarn. Thus, it is important for the knitter or the knitting business owners to pick the machine as per the thickness of the yarn they are planning to use. On the basis of yarn thickness or the weight of item used, knitting machine suppliers provide three different categories of knitting machines. Same are discussed as under:

Flat Bed Knitting Machine (for light weight items)

A flat bed knitting machine is characterized with small hooks placed at a distance of  .45centimeters or 4.5 millimeters. These machines are meant for thin yarns and are best for designing fairisle patterns, lace, cables etc. The yarns used for this particular knitting machine has to be baby weight or something even lighter than that. DK or sport yarn is the maximum which can be used in this machine.

Mid-Gauge Knitting Machine (for mid weight items)

A mid-gauge machine is known for producing patterns which resemble the most to hand knitting. As the name suggests, mid-gauge machines use yarns that are neither too thick nor too thin. The placement of hooks is done at a distance of .65 centimeters or 6.5 millimeters. DK and common worsted sport work the best on this machine. Though, it is advised to clarify the details with the knitting machines supplier beforehand.

Bulky Knitting Machine (for bulky items)

A bulky knitting machine is used best for knitting heavy sweaters. The hooks are placed at a distance of .9 centimeters or 9 millimeters. Knitters can play with cables and fairisle patterns on the bulky machines as these work best for such designs. One cannot use a yarn lighter than  sport or DK as they are the minimum what bulk machines can afford.

Though no knitting machine can replicate the exquisiteness of a hand knitted item but still knitting machine business is prospering day in and day out for the simple reason of meeting the requirements of a highly industrialized society where hand knitting cannot cater enough.

Vaiv Jais has wide knowledge of B2B Marketplace and Business industries. Get latest updates on Products Directory which are of great demand in B2B space.You can find more free information about Knitting Machines at our online catalog Catalogs.indiaMART.com

The best gear for ice fishing.

The best gear for ice fishing.

Article by Justin G









The right gear can mean success or failure while ice fishing. To have a successful ice fishing trip you are going to need to pack the right gear as well as bring along the right friends. There are several ways to have fun out there in the cold and on the ice but the best way is to bring along good friends that are going to help you laugh your frozen butt off and toss back a few beers while you are doing it. Ice fishing gear is varied and there is quite a bit of it, if you want to bring more than just the basic essentials.

The basic equipment that you will need to survive and catch some fish are, very warm and very comfortable clothes for obvious lack of frost bite reasons. Gloves and hand warmers because after you pull a fish through the ice your hands are going to be freezing cold. Thick warm boots and possibly snow shoes depending on the conditions and how you will be getting to the location. Make sure that you pack extra socks, you might need them and if you do you will really appreciate that they are warm and dry. That covers keeping warm and cosy in the sub zero temperatures but if you want to actually catch some fish you are going to need some more gear.

First you will need a fishing rod or two, with sensitive tips but still have some strength just in case you haul in that huge one. There are ice fishing specific rods that you can buy which are shorter that regular rods but if you are on a budget you can use a regular rod. Be sure to bring some good line, four to eight pound test is usually a good fit. You are definitely going to need some kind of bait such as crappie minnows or worms. Bring jigs spoons and hooks to help you catch more fish if you need them. You can bring along bobbers if you don’t have a proper ice fishing rig which lets you know when the fish strike. Be sure to also bring some minor tools to remove the hooks, cut the lines or whatever you might need them for. I suggest a folding multi-tool. An ice scoop is required to remove any ice that forms in the hole that you cut with the auger or ice saw. Also you are definitely going to need something to sit on. A large bucket works great because you can haul you gear out in it and use it to haul you catch back home when you are done.

There is a huge amount of gear that you can bring to make your trip a lot more easier and almost luxurious. Some of this equipment is quite nice but the rest is just extravagant. This includes fish finders, cameras, cell phones, underwater cameras, strike sensors, and GPS equipment. Nicer pieces of equipment include, a fishing hut, a space heater, cleats for easy ice walking, flashlights and lanterns, lighters and matches, and something to check the thickness of the ice. Tip ups are nice to bring along but are not quite necessary.

If you are going out for a all day expedition you are going to need extras such as food and drinks. I suggest beer as a proper beverage. There are other things that you are going to want to bring such as sun glasses to protect your eyes from the glare of the ice and snow. Those are the best bits of equipment that I can suggest, but there are many variables that you are going to have to cope with yourself. These are things such as ice thickness, storage for gear and transportation because if you are driving a truck right onto the ice you can bring pretty much any thing that you want but if you are walking ten miles then you are going to have to think about what you want to carry for that distance. Most importantly though you are going to have to have fun out there. Why bother if you are not enjoying yourself?



About the Author

Justin G. is an extremely accomplished angler, who loves to go fishing as frequently as possible. He has put his expertise online at: http://www.icefishingpro.com










Using Catfishing Rigs When Going Catfishing

Using Catfishing Rigs When Going Catfishing

When speaking about rigging you are simply describing the act of putting the bait on the fishing line and paying attention to the weight of the bait, especially when you are after the really big ones. To set up catfishing rigs is actually a very easy thing to do and is not in anyway a difficult thing to do even when you are after monstrous catfish.

One type of rig that is well-known is the one called the deep catfish rig. To utilize this particular kind of rig you have to get an appropriate weight at the end of the line instead of making use of an ordinary hook. This is important since the weights will ensure that you do not need the snags. Under ideal circumstances, an ounce should be the normal weight and it’s used with a Palomar knot. With this type of knot you can easily clip the hooks and weight to the fishing line. Tying the Palomar knot is also considerably easy and hooks nicely once it is done. You need to snap the line before you decide to loosen the knot.

Once finished, the next stage involves the tying of the hook from the end of the line. The distance from which this is to be done is twelve to eighteen inches, with eighteen being the maximum that you can employ. A wired leader can also be used. The purpose of this is to prevent the coiling of the line around the hook, although this is in no way a compulsory move. To ensure that you get the very best out of your catfishing rigs, you need to consider how big the fish is. If you are only after the small catfish, you can just stick with the smaller hooks as well, that is the number 2 and move up to a 2/0. An 8/0 circle hook is preferred in a case where you are making use of bits of perch or shad as your baits, and this will increase your chances of getting the bigger ones, which can be very troublesome. Setting the hook is a nicer option as it ensures that the chances of escape are reduced to the barest minimum.

Catfishing rigs that are shallow need to be employed in bodies of water that are quite shallow as well. Superb catfish bobbers are needed in making these kinds of catfishing rigs. You need to maintain the distance when you place the bobber on the hook, although this will depend on how deep the water is but two feet seems just about right. After this stage, you then introduce a split shot in between the hook and bobber. Similarly, the same procedure will be followed for other types of hooks as well.

The type of catfishing rigs you can use will never come short no matter the purpose of your fishing. However, in making the final selection of the rig that you want to use, you have to also consider the season of the year, daily temperature and even the weather. Once the rig is in place, fishing becomes more of fun than work.

Jeremy Jefferson is a catfishing expert. For more great tips on catfishing rigs, visit http://www.catfishinggenius.com.

 

The Importance of Catfishing Rigs

The Importance of Catfishing Rigs

Rigging in catfishing terms means to take into consideration how heavy the bait will be especially when you are after large fish. However, the good news here is that setting up catfishing rigs to catch big catfish does not necessarily have to be a difficult task. Luckily, there are various catfishing rigs that you can make use of. At the same time, it is important that you make use of easy rigs -one with weight and a strong hook should do.

One type of catfishing rig is known as the deep catfish rig. You need to get reliable weight instead of just a hook at the line’s end if you want to make use of it correctly. This is noteworthy because using weights will let you do away with snags. Ideally, the weight used should just be around an ounce and make sure a Palomar knot is suitable with it. This type of knot is one that can also be used for clipping hooks and weight to the line. Tying this knot is also straightforward and stays nicely in place. Snapping the line has to be done before the knot is loosened when using it.

The next step is to tie the hook from the end of the line. This has to be done from a distance of about twelve inches with eighteen being the maximum. You can also make use of a wired leader as this will prevent twisting of the line around the hook but this is optional. One factor that must always be considered when making optimal use of catfishing rigs is the size of the fish. In a situation whereby your intention is to catch small catfish then it is better for you to use corresponding hooks like a number 2 and inch up to a 2/0. If you are making use of bait made of perch or shad, an 8/0 circle hook will be better because it increases your chances of getting the larger ones. This will prove to be more difficult to catch. Hook setting is a better alternative because it reduces the chance of escape once the fish is caught.

It is appropriate to use a shallow catfishing rig if you happen to be fishing in waters that are not too deep. You need excellent catfish bobbers to make these types of catfishing rigs. The distance to be maintained when placing the bobber on the hook will depend on the depth of the waters but two feet is usually okay. Then you introduce a split shot in the space between the hook and bobber. The same thing goes for other types of hooks to be used.

Irrespective of your purpose and intention, there is always a type of catfishing rig that fits you. Temperature, season and weather must be put into consideration. Catching hefty catfish will become as easy as anything once you perfect the setting of the rig. Always remember that you need the correct catfishing rigs to make your fishing interesting and easy.

Jeremy Jefferson is a catfishing expert. For more great tips on catfishing rigs, visit http://www.catfishinggenius.com.

 

The skill of catching fish easily

The skill of catching fish easily

Bait fishing is one of the easiest ways to catch fish. The approaches to catching fish are many–fly fishing, spinner fishing, jig fishing, trolling, and snagging to name a few—bait fishing is a good method for the beginning fisherman or fisherwoman. Bait fishing offers both simplicity and effectiveness for anglers. It is simple in that one only has to bait up a hook and throw the line in the water, and it is effective because the presence of live bait is a temptation that hardly any fish can resist!

It is said that if you give a man a fish he’ll eat for a day. If you teach him how to fish, however, he’ll eat for a lifetime. This article can help keep your belly full of fish for years to come!

Choose a location. Make sure to fish in water that actually has fish in it. If there aren’t any fish, you aren’t going to catch anything. Many newspapers have local fishing reports that will list locations and tell you what fish, if any, are biting and what they’re biting on. You can also ask around at angling shops, marinas and camping supply stores in the area. You can also check by throwing in food scraps and waiting a few minutes.

Choose your bait, and your hooks. Once you have some idea of what fish you’re looking to catch and what they’re eating, you can pick the right bait. You need hooks that will FIT INTO the fish’s mouth. #1 hooks work well for many things, but size 8 to 5/0 will work well for some fish. Ask your local tackle shop about the hook sizing system (i.e. 6,4,2,1,1/0, 2/0). The smaller the hook the better the chance of a bite, also a very thin line will result in more bites. Making a hook knot is difficult with small hooks. Ask a tackleshop owner or another fisherman to teach you.

    * Because fish eat insects and aquatic life, there are literally millions of effective baits to choose from. The old standards are tough to beat, though. Consider using worms, salmon eggs, grasshoppers, shrimp, liver,bacon , or synthetic baits–Power Bait, for example–that are made to resemble and smell like live bait. You can either purchase live bait at the local angling shop, or you can gather your own. Many anglers gather worms in a lawn after a rain or late at night with a flashlight. You can find grasshoppers along the banks of a stream.
    * If bait is plenty start feeding some bait around the place where you want to fish. Repeat this regularly especially in swift streams.

Choose the appropriate bait fishing method:

    * If the water is quite swift–a small river or stream–it is probably best to attach weights to your line about 12″ above your bait. By weighting down your line you will keep your bait in place about an inch above the floor of the water—right where fish are likely to be hunting.
    * If the water is not moving rapidly, as in a lake or a large, slow river, consider using a bobber. A bobber is generally a brightly colored plastic device that floats on the surface of the water. The bobber will attach easily to your line, and you should place your bait below the bobber. Adjust the distance between the bobber and your bait to accommodate the depth of the body of water. You want your bait located where the fish are, so consider shortening and lengthening the distance between bait and bobber, or even adding small weights (also called split shot) to keep your bait perfectly suspended under water.

Cast your line and wait for a bite. You can tell if a fish is biting by touch, by watching a loose line or a bobber, or by attaching a bell to the end of your rod. Make sure with a slow movement of the rod that there is no more slack in the line when you try to hook the fish. Waiting for a bite can take a lot of patience, but that’s what fishing’s all about. Using light tackle combined with feeding around your bait will produce bites much quicker. When you catch a fish feed a little extra, because fish often live in smaller or larger groups that you want to stay around.

Wait. That said, if you’re waiting for 10-15 minutes and you still haven’t gotten a bite, try casting somewhere else and wait again.

Hook that fish. Once you feel a tug on the line you will want to “set” your hook. To do this, simply give your fishing rod (and consequently the fishing line) a quick jerk backward and up. If you have a fish on line, it will fight back and your line will follow the movements of the fish. It can sometimes be difficult to tell if you have a bite or if you’re just feeling the current or a fish bumping into the bait. Only practice can help you get a feel for it.

Pull the fish in by pumping and lifting the rod vertically while simultaneously reeling. Don’t use the reel to pull in the fish, except for very small fish. Keep the line tight. More fish  are lost to loose lines than anything else. A loose line provides an opportunity for your fish to “throw the hook” right out of it’s mouth. By keeping tension on the line you will ensure that the hook remains in the mouth of the fish. All modern reels have an adjustable drag but nylon lines drag can be adjusted by pulling with the hand. If you feel the nylon stretching, the drag should begin to work. Even very big fish get tired when pulling against a constant line pressure. Try to use the rod to steer the fish to open water.

Decide if you are catching and releasing or keeping the fish. If you are going to cook the fish, you may want to consider cleaning the fish at this point.

Also look for fishing moving along the shoreline! This is a really great place to find them and they just jump out of the water.

How to Eliminate Back Pain – Information on Back Pain and Sciatica

How to Eliminate Back Pain – Information on Back Pain and Sciatica

Article by Julian Hooks







There are many causes for back pain. The most common is muscular strain caused by overuse of the back muscles. This would include lifting or lifting and twisting. Other causes of back pain include herniated discs, trauma, tumors and bone diseases.

Sciatica is simply an inflammation of the sciatic nerve which runs down each leg. It is a very large nerve and the main nerve to the legs. Sciatica occurs for many reasons as well. The most common reason for sciatica is some type of pressure on the sciatic nerve, generally caused by the herniation of a spinal disc in the lower back.

Herniation, slippage or movement of the discs between the vertebrae are common causes for pain in the back or neck areas.

The first course of action to back pain treatment is rest for a day or so, then do gentle stretching exercises designed to strengthen the low back. Often it is advised to take an over the counter anti inflammatory to treat your back pain, such as ibuprofen. It is important for everyone to learn to move and lift correctly. The knees should always be bent when picking up a dropped object as opposed to bending at the waist. Bending and twisting is also a major no-no. You need to turn your entire body, not twist at the waist to perform tasks.

If after a couple of weeks, the pain has not been relieved, it would be necessary to take on more aggressive back pain treatment. Generally, it would be a good idea to get an X-ray to check for structural or bone damage of the spine and if that is negative, an MRI would be recommended. An MRI, magnetic resonance imaging, would help indicate if any soft tissue damage is noted. Depending on the results of the MRI, a treatment therapy can be implemented.

If herniation of discs is indicated, physical therapy is often continued with treatment directed towards the afflicted disc or area of spine. Sometimes chiropractic care, whereas gentle spinal manipulations can help align the discs and relieve pressure.

If a bone spur or tumor or cyst is present, then surgery would be indicated. It is often recommended to see an orthopedist who specializes in diseases and conditions of the spine if this sort of ailment is involved. The spine specialist can then advise of the best type of surgery for your condition. Attempts at minimally invasive procedures would be examined first.

Other treatments would include injection of pain relieving medication into the soft tissue and/or epidural area, that is around the spine.

With proper diagnosis and treatment, patients can expect to enjoy pain free living.

If you suffer from any type of back, neck or sciatic pain, then you need to go grab a copy of The Healthy Back Institute’s new book, The 7-Day Back Pain Cure.

Right now they are actually giving it away for FREE… You just pay a small shipping fee. Plus they are also they are also donating a portion of the shipping fee to St. Jude’s Children’s Hospital or Habitat for Humanity – you even get to choose the charity!

Get your FREE Copy at BackPainTreatment4U.com

You can also review our collection of articles about back pain, neck pain and sciatica along with information on causes, back pain treatments, and more.



About the Author

BackPainTreatment4U.com

How to Make LED Grow Lights for Indoor Planting at Home

How to Make LED Grow Lights for Indoor Planting at Home

Article by Lulu Fernandez







LED grow lights, or commonly called Light-Emitting Diode lamps are steadily becoming a favorite alternative among indoor gardeners for their covered plant business. They gained a lot of advantages over their led grow lights non-user competitors such as:

• Lower maintenance expense • Bigger power savings • Longer life span • Better development yield• Use smaller garden plot• Eco-friendly

If you want, you can have LED grow lights for your own and assemble it at cheap cost. Here are 6 easy steps to follow. But before you begin, have these things prepared: ceiling panel, drill and bit, 2 strands of red and blue LED Christmas lights, glue gun, glue stick and a thin rope to be used for mounting.

Instructions:

1) Create 50 holes on your ceiling panel by marking 5 rows with 10 holes each row with a distance of about ¼ inch wide in-between each row. Make sure that there is a 6 inch space about the outer perimeter. Drill holes every 3 1/2 inches.

2) Stick out the lights out of the shell of the panel by poking the lights through the back of the said panel. Ensure that they are tight and well secured. Never pull the lights through the hole, or you may damage the bulbs.

3) Hot glue the cord to the panel with your glue gun. Do it on both sides of each hole.

4) Get the light strands and with each strand, switch the next strand into the end of the first one and skip a hole. Then hot glue the plastic portion of the plug to the panel to hold it. Repeat the same process with the other lights into the holes.

5) Before slinging your mounting rope, punch two holes on both ends of the panel. Then slip the thin rope down through the top and up through the other hole. Make a loop and secure it. Do the same process for the other side.

6) Set up hooks over your seedlings. Hang the ceiling panel from the hooks, switch it on and watch them glow. Yup. That’s all to it.

If you don’t have the time to make your own LED grow lights and have the money to spare, then just buy it in your favorite DIY store. But before you do,it will be best if you make some more research by reading other LED grow lights review and know the best string lights that will fit your needs. One thing for sure, with the savings you will have on your electricity bills plus the low maintenance cost, you will recover your investments on LED grow lights sooner than you think.



About the Author

If you find the above steps helpful, visit my site outdoor string lights and patio string lights for more smart tips in outdoor lighting.