What Catfish Fishing Hook Do You Choose?

What Catfish Fishing Hook Do You Choose?

Fishing for catfish can be one of the most exciting types of fishing you can do, but there really are some monster cats out there, so knowing how to select the right catfish hooks for the job is of major importance.


Depending on where you plan to fish, and whether you are out to catch basic table cats or huge monster cat, you will want to adjust the type of hook you plan to use. The good news is that there are some outstanding quality products available to help you nail the catfish you are after.


Keep an assortment with you while fishing, so you can change out the hooks to better fit the size of fish you are getting.


If you are fishing for table fish, and having a problem with the catfish taking your bait, running with it for a short distance before just simply dropping the bait, you might want to switch to a smaller hook like a 1/0 baitholder. This usually hangs in there a bit better, and will help you bring some table fare to the table for dinner. Of course, it is not as effective when you want to catch really big catfish.


If you are in a position where you need to cast out a long distance, you can always use a 2/0 octopus. This hook will work very well with a balsa wood and lead float called a Livingston Float. When you cast with this rig, it will really get out there! So, for casting long distances, try the 2/0 octopus.


When it comes to winter fishing for catfish, you really can get better results using smaller hooks too. Even when you are trying to catch big fish. Especially in the winter, when the water is cold and calm, the catfish tend to be finicky, and you have to try to get them out of the water without spooking them.


If you use anything bigger than a 2/0 hook, you will probably get bites, but the tendency is for the cat to spook and drop your hook like it was hot! This is particularly true in heavily fished waters, so no matter where you are fishing…lakes, rivers, ponds, etc. when getting bites is not the problem, just remember that you can always substitute a smaller, strong hook, and probably solve the problem.


In the springtime, when the fish are not so finicky, you can move up to some bigger hooks like a 6/0 baitholder hook. These are particularly good when there are flood water kinds of conditions present. During flood conditions, the fish tend to get very aggressive, and they really grab on to basically whatever is out there. You will miss some fish you could catch if you use the smaller hooks in flood conditions.


Another consideration is using the right size hook for whatever bait you are using. Generally speaking, bigger bait catches bigger fish; smaller bait catches smaller fish. The best hook, in my opinion, for catching catfish using shad head for bait is a 1/0 or 2/0 L042. For general use, you will most likely be satisfied with a 3/0 baitholder. While others will work well, it is best to consider this first.

Dan Eggertsen is a fishing researcher and enthusiast who is committed to providing the best catfish fishing information possible. Get more information on catfish fishing hooks here: http://www.askcatfishfishing.com/

Tips on buying golf clubs

Tips on buying golf clubs

Do you need standard length or custom length clubs?

Most golfers use standard length clubs. If you are considerably shorter or taller than the average person, you may want to consider getting custom-length clubs to suit your height. If your arms are longer or shorter than the average person, you may also want to consider custom-length clubs. Generally, the longer the club, the more club head speed it can generate, resulting in more distance. The downside, however, is that the longer the club is the more difficult it is to control.

The only way to find out if you do need custom-length clubs, is to take a simple measurement – you will need a friend or family member to help you with this!

Put your golf shoes on and take your normal golf stance, (feet shoulder-width apart) except that you should stand upright with your arms relaxed down your sides.

If you are a right-handed player, take a measurement from your left wrist (on the line where it connects to your hand), to the floor. Left-handed players should measure from their right wrist. The average height golfer will have a measurement between 30-35 inches. If your measurement is lower that 30 inches or higher than 35 inches, you will most likely need custom-length clubs.

Do you need Steel Shafts or Graphite Shafts?

Good question – see below some general guidelines:

LADIES OF ALL AGES:

– Should play with graphite shafted irons and woods.

MEN AGED 55 AND OVER:

– Should play with graphite shafted irons and woods. As golfers get older, their swing speeds generally slow down, which is why graphite shafts are recommended to try and regain as much distance as possible.

BOYS/MEN AGED BETWEEN 12 AND 55:

– Should play with steel shafted irons and graphite shafted woods.

For more great free tips on buying golf clubs, visit:
http://www.great-free-golf-tips.com/tips-on-buying-golf-clubs.html

Homepage: http://www.great-free-golf-tips.com

I love everything about golf and am passionate about learning and sharing new tips and techniques for playing better golf.

The Best Solution to Drawing a Golf Ball – 4 Easy Steps

The Best Solution to Drawing a Golf Ball – 4 Easy Steps

Article by Sean O’Kelly







Most of us who don’t hit the golf ball for great distance hope to improve our long game by drawing, or imparting a little hook, on our long shots. For any beginner as well as some intermediate players this might initially appear extremely hard, however with a little knowledge of what we are attempting to accomplish plus a little practice, anyone can be hitting this shot consistently.

There are two key benefits to draw the golf ball:

• Distance. Hitting a ball which has a hook spin will cause the ball to roll a greater distance than will a fade spin.

• Accuracy. If we are able to consistently strike the ball with a controlled draw, we could aim to the right of our target and allow the golf ball to shape toward our target area.

So to understand how to draw a golf ball, we have to first consider the grip. The main elements, then, to get a hook grip are as follows:

1. Place the grip of the club along the base of the fingers. This permits you to produce increased power as a result of greater wrist hinge, while doing so enhancing your control, or feel, for the club.

2. Do not grasp the club too hard. As the great Sam Snead once said, “If a lot of people gripped a knife and fork the way they do a golf club, they’d starve to death”.

3. When gripping the golf club using a normal grip, the “V” between your thumb and forefinger points at the right shoulder for right-handed golfers, and the left shoulder for left-handed golfers.

4. To draw a golf ball, make use of a strong grip, which can be achieved merely by moving your hands on the club so the “V” is to the right of your right shoulder (and of course to the left of your left shoulder for lefties). This will automatically shut the face of the club as it approaches the ball, imparting a counter-clockwise, or hook spin.

These simple methods to draw the golf ball are only general, as each golfer will have to experiment how strong his grip must be for the ideal effect. For example, those with naturally strong hands might find a stronger grip unnecessary to bring the club into proper position.

The final component that must accompany the hook grip to properly draw the golf ball is correct swing path. In the event the club on impact doesn’t go through the ball, that is, if it cuts across the ball on an outside to inside path, the closed face of the club will result in a “pull” shot. This for a right-handed golfer will cause the ball to go far to the left. The path of the golf club head needs to be on a slightly inside to outside plain. The desired result will be achieved when the grip and the swing path of the club work together.



About the Author

My name is Sean O’Kelly, for more tips and information on how to improve your long game, click HERE, and for an interesting perspective on how to play golf for free, click HERE for a 50 page guide.

The Most Powerful Move in Golf Review with Steve Elkington and Martin Ayers

The Most Powerful Move in Golf Review with Steve Elkington and Martin Ayers

Article by Nick Del Pozo







This article is written for those who would like an open and honest detailed review into the most powerful move in golf. I am personal friends with Martin Ayers and Steve Elkington. I have been fortunate to be able to work with Martin Ayers one on one. I met him over a six months ago through a site known as Secret in the dirt that Steve Elkington created as a free online community for every level of golfer to be able to connect and share anything and everything golf related.

Personally I own a golf academy for kids and through implementing what I have learned and teaching my personal students there is no doubt that the most powerful move in golf will change anyone’s swing immediately by following the simple drills outlined in the video.

So what is the most powerful move in golf ?

The Most Powerful Move in Golf is a collaboration effort between 10 time PGA tour winner Steve Elkington, Golf Instructor Martin Ayers along with legendary World Golf Hall of fame Jackie Burke.

Steve Elkington is an Australian professional golfer who plays on the PGA Tour. He spent over 50 weeks in the top-10 of the Official World Golf Rankings from 1995 to 1998. Elkington has won 10 events on the PGA Tour, most prodigiously the 1995 PGA Championship at the Riviera Country Club, which is his only major, and the 1991 and 1997 Players Championships. Elkington was a member of the International Team in the 1994, 1996, 1998 and 2000 Presidents Cups. In 1995, he was awarded the Vardon Trophy; this award is given annually by the PGA of America to the tour player with the lowest scoring average.

Martin Ayers is an Australian golf instructor. Martin developed a large following in his own right by expressing his unique ideas on Youtube and in various golf forums. He was also one of the earliest members of Secret in the Dirt when in launched in April of 2010.

He began working with Steve Elkington in the Spring of 2010. The concepts that he worked on with Elk are now presented here in “The Most Powerful Move in Golf.”

When the two connected, they began collaborating on Elk’s swing together, and began work on The Most Powerful Move in Golf. Within the video, you’ll discover:

1. How Martin Ayers came to understand The Most Powerful Move

2. Why it is so effective the average golfer

3. How to implement the Move into your swing easily and effortlessly.

Here are what a few people are saying about Martin and The Most Powerful Move DVD:

“I could go on for hours about the specifics and whatnot, but all I can say is that Martin is seriously a genius of the golf swing, through some unorthodox drills and ideas, you will get a lot better hitting the ball and can really change the way you look at golf “.

The wait for “The Most Powerful Move in Golf” seemed like an eternity! But I can tell you now it was well worth it!

“The video is a great piece of work. Martin has discovered something very important. If this isn’t Hogan’s Secret then Hogan never had one

Take if from a guy who feels like he has tried everything — I literally have read well over 150 books on this game — Martin’s stuff is the real deal. For the price of a round of golf at a municipal course (perhaps with a cart in some places), you can learn a move that will put more power, accuracy, and confidence in your game. That is the bottom line”.

“I bought & downloaded Martin’s video and got up at 5.00am this morning to try the swing. As a devoted TGM admirer I found the moves Martin succinctly described very useful and I did get the ball to fly 10-15% further.The biggest improvement I found was that the move kept the pressure points on my grip intact without having to grip the club any harder. Occasionally my grip separates at the top, not any more.The description of the swing was well described and easy to follow”.

“If you have not given Martin’s method a try all you are doing is cheating yourself out of a lot of great golf…”.

For a detailed review and videos visit:

http://TheMostPowerfulMoveinGolfReview.com



About the Author

I teach kids how to play golf.

Some Quick Recommendations To Help Resolve Golf Slice Problems

Some Quick Recommendations To Help Resolve Golf Slice Problems

Reducing handicap is nearly always the objective of folks who are interested in golf. The golf slice is one area that commonly will cause complications for such individuals. It’s a common problem and there are a wide range of things that can be the root cause of it. The guidance shared in this article can help you correct your slice and begin enhancing your scores today.

Taking the golf club too high in the backswing is an usual error made by people who slice the ball. Verify the position of your backswing at the top to correct this problem. Is the shaft of the club over your head or is it above your shoulder? The shaft should be only a little bit higher than your shoulder or you are taking the club too high. Should you utilize a proper golf swing, you will feel your leading arm cross your chest just a bit as you backswing. The end result will be a flatter and more rounded golf swing which can also provide additional power.

A great number of golfers assume that if they slice the ball, it is easily fixed by moving to the left for right handers and to the right for left handers. This is not the case unfortunately. You are in fact slicing the ball as a result of the direction and angle the clubface is looking upon contact.

You are going to slice the ball even worse if you shift your stance off target to make up for your slice. Rather than looking away from the target, take the time to just work at your swing and ensure you are striking the golf ball squarely while being in-line with the target. This will correct overcompensation and might help remedy your slice.

For you to take your swing to the next level and correct slicing issues, it is imperative to develop correct balance into your stance. You’ll probably lose balance and disrupt the orbit of your golf swing if there’s any sort of free motion while you swing the club. Maintaining feet shoulder width apart, adequate forward bending of the torso and a good degree of knee flex can really help promote appropriate balance in your stance.

Make sure your hands are not gripped too far to the left on the golf club. The face of the club might be square to the ball at the outset, but this grip may cause the club to rotate while you swing. Once you grip your golf club you will notice that “V’s” are created in between your thumbs and your forefingers. For the standard slicer these will point toward the leading shoulder when addressing the golf ball. However, the “V’s” will point toward the right shoulder when applying proper grip.

Solving a golf slice is oftentimes a tricky and difficult ordeal. Nevertheless, it’s possible to eliminate golf slicing moving forward by following the information on this page, understanding exactly where issues lie and taking steps to fix these problems.

Matthew Barret offers a totally free system for finally doing away with that irritating slice in golf at CorrectMyGolfSlice.com. If you’re all in favour of finding out much more about golf slice tips and hints than it’s worthwhile to definitely head on over.

Repair the Golf Slice – the Major Key You Must Follow To Cure a Slice

Repair the Golf Slice – the Major Key You Must Follow To Cure a Slice

Article by Sean O’Kelly







The golf slice is among the most irritating challenges to correct for some golfers, but if the factors behind why a golf ball slices are plainly comprehended, solution is not very difficult. But before we give you the answer to remedy that slice, please take a few deep breaths and SLOW DOWN your swing. All will fall into place if you think three-quarter speed.

The foremost key now that we will deal with to correct the golf slice is correct swing path. Since your golf swing is circular, that is, the club head begins behind our head, swings around our body and ultimately ends up behind our head, it might appear physically impossible to not impart spin on a ball. But at the point of contact tend not to think circular. Ok, I’ll explain.

When looking down at the golf ball, picture the ball moving in flight. For the right handed golfer, if the ball is rotating in a clockwise course the ball will slice, or move in the direction toward which the ball is spinning. Naturally, for the left handed golfer the opposite holds. The aim to correct the golf slice would be to eliminate this spin.

How can we accomplish this? If, by looking straight down on the ball, we were to imagine it as being a clock with twelve o’clock being the direction we’d like the golf ball to go, if we were to make initial contact on the ball at seven o’clock and hit through the ball to the one o’clock location, we’d impart minimal spin on the golf ball, and thus giving the ball a straight flight, or possibly a counter clockwise, or hook spin.

Of course this would not be hard if not for the fact we are swinging, to some extent, around the body in somewhat of a circular action. So prior to impact and just right after, we should think about the club taking a virtually inside out path. This isn’t as challenging as it seems. To correct the golf slice, practice accomplishing a couple of things:

1. Close the stance somewhat. Basically, ensure that the front foot is a bit closer to the golf ball than the back foot.

2. Position the ball further back in your stance. Many of us have the propensity to move the ball forward, frequently even past our front foot, which makes it extremely hard to reach that “one o’clock” position on the golf ball. Regularly sticking to those two swing keys will do wonders for the fix the golf slice. Of course some practice to fine-tune those techniques for your swing will be necessary.



About the Author

My name is Sean O’Kelly, and I hope that I have helped you cure that “banana ball”.  For more techniques to  fix the golf slice, and many other golf fixes, click HERE.  Also, if you want to check out some ways to play golf for free, click HERE a 50 page guide.

How to Complete Your Backswing

How to Complete Your Backswing

Article by melody







Tiger Woods is nearly unbeatable when he is tied for the lead on Sunday at a major championship. However, after watching yesterday’s round, I think there three things that could allow us to witness one of the most incredible David versus Goliath upsets in golf history. If one of the players follows the criteria below, they might be the one holding the Wanamaker trophy today instead of Woods.

Making a full shoulder turn is critical to both distance and accuracy.

From time to time, we all have a tendency to shorten our backswings. Your muscles may not be as loose as normal, you may be faced with a crucial shot and get over cautious, or you may think that shortening your swing will give you more control. Whatever the reason, not making a full shoulder turn can have some negative effects.

Firstly, and most obviously, you’re going to lose distance. The less you wind up the body, the less power you can translate into fast clubhead speed.

More importantly, a full turn gives your body the time and space needed to complete the correct mechanics of the downswing. A truncated backswing means your lower body has to do too much work to get the golf club moving on the correct plane. The result is often an out-to-in swing path, which will result in a pull or a slice (or at best, a weak fade). A full shoulder turn, on the other hand, gives your hips time to gently rotate, which pulls the upper body round in the correct motion, which in turn brings the clubhead on a more powerful in-to-in (i.e. correct) path.

Next time you’re on the practice range, make sure you are making a full shoulder turn.I believe that you can make an great progress only you practice like this.

By the way,if you need another golf clubs,you cannot miss these styles as follows.

Hot products:Callaway X-24 HOT IRONS Callaway?Diablo?EDGE?Driver Ping Rapture V2 Fairway Wood TaylorMade Burner Superfast Driver websites:http://www.golffactorystore.com



About the Author

golf clubs

Mizuno MX-300 Iron Review

Mizuno MX-300 Iron Review

Article by Presila







Still, when I was given the opportunity to review the newest irons in Mizuno’s MX series, I was more than happy to oblige. I knew that I was in for a treat, especially since I remembered thinking their intention to blur the line between player’s iron and GI iron was pretty interesting back in October, when I covered their release.Now that I’ve had a while to get acquainted with the MX-300 irons, I can honestly say that I had no idea that I’d be this impressed. Elated or euphoric might be the better words in this case. Before we get into my thoughts and opinions though, lets first take a look at what makes these new irons tick.

DesignMizuno set out to create a club that fits somewhere between a players iron and a game improvement iron, and from that idea came the MX-300 line of irons. To give you a better idea of the concept behind the MX-300, think “a more forgiving MP iron.” Yes, the workability and sleek appearance is still there, but so is a larger sweet spot, and a nearly invisible cavity. The MX-300s are made from the Grain Flow Forged, 1025E “Pure Select” mild carbon steel, which plays a big part in that feel that Mizuno fans adore. In conjunction with the Grain Flow Forging process, Modal Analysis was used to further perfect that sweet, buttery soft feel and sound at impact.

They are in fact the successor to the MX-200 irons that were released in early 2009, and share some of the same design features. The Y-Tune Technology in the MX-200 has been updated in the new series and is now called Y-Tune Pro and is said to provide a much larger sweet spot, which further increases the forgiveness across the clubface. The Y-shaped channel in the cavity is visual evidence of the Y-Tune Pro Technology.

A milled pocket cavity can be found in the long and mid-irons, while the short irons make use of a solid power bar. By doing this, Mizuno was able to optimize the center of gravity depending on the type of shot each iron provides. The solid power bar gives more control in the scoring irons, while the milled pocket cavity allows for weight to be relocated low and deep to help achieve a higher ballflight with the long irons.

EstheticsThough labeled as a game improvement iron, the MX-300 exudes the beauty that you might normally find in a blade. The thin top line is an indication that these irons don’t exactly fit squarely into that GI category, and thus are not very bulky or excessively thick. Looking at the cavity, the Y-Tune Pro is immediately identifiable by the “Y” shaped relief, as well as the “Y-Tune Pro” badging on the top hosel side of the cavity. Opposite that badge, on the top toe side of the cavity is the MX-300 badge. Longtime Mizuno fans will immediately notice a deviation to Mizuno’s traditional use of blue and yellow in favor of a more subtle grey and black combination in the badging. Though I never had a problem with the blue and yellow combination, I found the updated color combo to be very sharp and sleek.

While it’s obvious that some of the design of the MX-300 is derived from the previous-generation MX-200, I found the MX-300 to be a good bit more esthetically pleasing, though most all of Mizuno’s irons are free of any distracting graphics or bulkiness. The MX-300s simply have a sharper, more elegant appearance than the older irons in the MX line.

Looking directly down at the cavity, the difference in the scoring irons and the long irons can be seen, as the short irons (8-PW) make use of the solid power bar, while the long irons (3-7) have an empty pocket cavity.

The cavity itself is not visible at address, which is undoubtedly a desired trait for the mass majority of players looking for a club in this category. Combine that with the thin top line and a minimal amount of offset, and the result is a club that appears very “player’s iron”-like at address, which is why the amount of forgiveness in these irons may come as such of a surprise. More on that later though.

The hosel retains the familiar “Grain Flow Forged” stamping and leads down to the compact face which features modified U-grooves that are designed to conform to the new Conditions of Competition. The double nickel chrome plated finish gives the clubhead a very sleek, satiny look that I found very attractive.

PerformanceUpon unpacking the MX-300s, I was a little surprised, as I didn’t expect them to be as attractive as they were. They are much more elegant in person than they are in the pictures. At that point, I really didn’t know what to expect in terms of performance, because surely MX-level forgiveness couldn’t come in a package that looked almost MP-like at address. Once I took them out for their first test, I realized how wrong I was.

Set up was simple, as they are free of the large amount of offset that is present on some GI irons. Looking down at them, I almost swore I was looking down at my familiar Nike Victory Red Split Cavities. The topline was very similar, though not quite as thin as my VR forged blades.

Though beating range balls hardly gives the same feel as contact with a quality ball, I had to start somewhere. My normal routine starts with a series of ½ and ¾ shots with a wedge or short iron. Even with rock-hard range balls, the feedback from the MX-300 gap wedge was accurate and soft (at least as soft as can be expected with range balls). As I progressed down through the mid-irons, I continued to be shocked by how great the feel was with these irons, even as I intentionally made contact off center. Of course if you get out to the extreme toe end, they let you know it. The thing about it was that they did give a slightly different feeling when I made contact off center, though it was still a nice soft feel. Where a lot of GI irons lose a lot of the ability to tell where on the face contact was made, these do not.

Normally, if you can tell you made contact outside of the sweet spot, you expect a loss of distance, but with these, that simply did not seem to be the case. Had I closed my eyes and hit these, and was allowed to see the results, I would swear I was hitting a SGI iron based on the results.

From the rough, they also performed exceptionally well, as they cut through the tall grass without getting stuck like some thicker, bulkier irons do sometimes. The dual cambered sole worked as advertised, as I never really had an issue getting them stuck when I’d come down extra hard and steep. In fact, they glided quickly through the turf, almost deceivingly so.

On my flush, solid shots, there was no noticeable difference in distance when compared side by side to my regular set, though the long irons are a single degree stronger. Where they shined was when I forced contact closer to the heel or the toe. As I said earlier, I can tell where contact was made, though it wasn’t the stinging penalty you may be used to. Instead, the feeling is still nice and soft, and the end result looks almost as good as a pured shot. There may have been a loss of three, maybe five yards at most.

Every iron in the set had a high, penetrating flight, and would land softly on the green without the worry of the ball rolling too far away from my target. If you like to work the ball, you should have little problem with the MX-300, as the extra level of forgiveness they offer isn’t too much to hinder their workability.

SpecificationsMizuno offers the MX-300s in a your standard array of lofts, ranging from a 3-iron, all the way up to a gap wedge, though the standard set runs 4-iron through 52° gap wedge. The stock shaft is the True Temper Dynalite Gold XP, in either the R300 or S300 flex profiles, and is a lighter, higher launching shaft than the Dynamic Gold. They come wrapped in Golf Pride M-21 58 round grips, which are somewhat similar to the popular Golf Pride Tour Velvet.

Being that I’m a little on the tall side, I usually require extra length and a more upright lie angle. Luckily, Mizuno Custom is there to take care of players such as myself. I also prefer the heavier weight of the Dynamic Gold versus that of the Dynalite Gold, and was happy to find that the Dynamic Gold is an option from the custom shop. On the subject of shafts, one notable difference between Mizuno’s irons and other manufacturers I’ve is that their standard length is a quarter-inch shorter, so if you may want to keep that in mind if you’re looking at getting a set tailored to your specs.

As mentioned, the iron set I tested came with the Dynamic Gold shafts instead of the standard Dynalite Gold XP. In addition to those shafts, others are available such as Royal Precision’s Rifle and Project X, and Nippon’s NS Pro 950. For a full list of custom shaft options, see here. Mizuno’s custom shop did a great job of setting me up with irons that meet my specs, and as an added bonus, they wrapped them with the Mizuno-branded New Decade Multicompound grips.ConclusionI truly believe Mizuno has a winner on their hands with the MX-300. I could see a 20 handicapper playing these just as easily as I could see a scratch golfer keeping them in the bag. They really are that versatile and really stay true to what Mizuno set out to do – create an iron that straddles the line between game improvement and players iron. I liked them so much that there is no doubt these will be in constant rotation in my bag for quite a while. Everything Mizuno fans love is here: the soft feel, the “click” on a solid shot, and the minimalist, aesthetic appearance.

I’d absolutely recommend these to anyone that can hit the ball in a fairly consistent manner. If you’re stuck in a spot where you cannot decide between players iron and game improvement iron, the Mizuno MX-300s may very well be exactly what you’re looking for. I also think these would be a great long iron option in a mixed set along with either the MP-58 or MP-68. Whether you opt for a full set or mixed, I fully believe these irons are an excellent choice that can give you the best a game improvement iron has to offer.http://www.etagh.com/Mizuno-MX300-Forged-Irons-Golf.html



About the Author

Adress:1608 National Trading Building Tel:86-018859201181

Scotty Cameron Studio Select Kombi Putter Review

Scotty Cameron Studio Select Kombi Putter Review

Scotty Cameron Studio Select Kombi Putter Review

 

The Studio Select Kombi is a Modern Masterpiece!

The Studio Select Kombi by Scotty Cameron looks like it belongs in a gallery of modern sculpture. Cameron, known for some of the best blade putters around, decided to venture into the mallet market with this one. And his commitment to craftsmanship and better putting shows in all details. It is a gorgeous putter, top and bottom, and the double-bend, no kink shaft is something to hold and behold!

But the real beauty of this solid chunk of precision-milled aircraft aluminum is what you can do with it on the greens. Your performance there is sure to improve, because the Studio Select Kombi is made to increase control over pace and aim. Adjustable weights in the heel, toe and rear, give it the heft it needs to limit the damage of miss-struck putts. A larger sweet spot means more putts leave the face on the right line, with no bounce or skid. The weight also encourages a consistency in the pendulum motion of the arms. Finally, the single red line makes alignment uncomplicated and effective. These features give more putts a chance to fall, and that’s a beautiful thing.

 

Who Should Use the Cameron Kombi Putters?

 

Professional grade all the way, but an excellent putter for anyone who breaks 90 consistently. The adjustable weights mean youth, women, and men will all find the perfect “Kombi.” PGA professional Brett Quigley loves his SSK, and this one will find a warm place in your heart when it takes its place in your bag. Handsome enough for a tasteful display on your coffee table between rounds. Effective enough for a skillful display on the greens during rounds (callaway x 24).

 

Titleist Scotty Cameron Studio Select Kombi Putter features the Studio Select 3-point weighting system and thick face for deep CG, creating a balanced putter that is stable throughout the stroke for forgiveness and great roll. It is precision milled from 6061 aircraft aluminum and has a clean, misted topline along with high-contrast sight lines making alignment easy.ping k15 driver|titleist ap2 irons

Buy wholesale golf clubs in the most reasonable price, wholesale golf clubs and golf equipment with free shipping worldwide

Several Very Simple Guidelines To Fix Golf Slice Issues

Several Very Simple Guidelines To Fix Golf Slice Issues

Reducing handicap is nearly always the aim of folks who are interested in golf. The golf slice is one area that frequently causes complications for such individuals. It’s a regular problem and there are a variety of things that can be the cause of it. The advice shared in this article can help you correct your slice and start elevating your scores right away.

Your consistency may be influenced dramatically by merely locating the golf ball back or forward in a player’s stance by just a couple of inches. Ideally you should line-up with the golf ball so the golf ball is about two inches to the inside of your left heel (for right handers). An outside to inside swing path, which usually is a culprit of the golf slice, is often encouraged by a stance where the golf ball is too far forward. Opposite of that scenario, a stance where the golf ball is too far back makes it tough to close the clubface on time which may result in a push slice. A repeatable swing that is precise and slice free can be achieved by establishing a consistent position in your stance.

Your hands should not be turned too far to the left on the golf club. The face of the club may be square to the golf ball at the outset, but this grip causes the club to rotate during your swing. Notice the “V’s” which are made between your thumbs and your index fingers. For the usual slicer these will point toward the leading shoulder at address. However, the “V’s” will point toward the right shoulder when implementing proper grip.

A great number of golfers unknowingly make a mistake as soon as they begin their swing. They will rotate the club clockwise with their hands upon takeaway. This causes the clubface to open on impact, even though it may feel right. The clubface should “open” during your backswing, however this should actually be as a result of rotation of your shoulders and your torso. Your hands shouldn’t be what causes it.

The correction for this is to simply grip your club making zero effort to twist your hands. Here is a simple way to see if you’re doing this right: At the top of your backswing the wrist on your glove hand must be perfectly flat.

Many players think that when they slice the ball, it can be merely adjusted by moving left for righties and to the right for left handers. They are wrong on this idea. You are not miss-hitting the golf ball due to where you’re standing; you are miss-hitting as a consequence of the place on the face of the club you are coming into contact with the ball and what direction the golf club is moving in.

You are going to slice the golf ball even worse if you shift your stance off target to compensate for your golf slice. As opposed to facing off target, make time to work on your swing and be sure you’re striking the golf ball squarely while being lined up with the target. This will correct golf slice issues that come from overcompensation.

Don’t let slicing negatively affect your scores and take away from your game. Utilize recommendations such as the ones above to correct your slicing problems and improve your all around game. You will be able to create a straight shot which reaches your planned target every time if you take time to ensure that your form is implemented the right way.

There is also a free site about golf slicing over at CorrectMyGolfSlice.com. There you will find video tutorials, drills and a variety of tricks that will help you remedy your slice and start shaving strokes off your game today.